[6pack] Fan Eliminator Query

[David Friedlander]

Easy peasy....

http://www.pattonmachine.com/Fan-Eliminator-Kit.htm

I've used Rick Patton's eliminator kit on both my TR6 and my TR3.
Very simple, straightforward with good directions, too.

Dave Friedlander



On Thu, Mar 19, 2020 at 2:54 PM Robert Lang via 6pack <6pack at autox.team.net>
wrote:

> Hi,
>
> I did an electric fan conversion for a client about a month ago and the
> fan extension eliminator piece was not drilled out for the dowel pins on
> the harmonic dampener. We had to remove the damper and then work the dowel
> pins to get them out so the eliminator piece would bolt flush. This added a
> couple of hours to the job because you have to pull the upper cross brace
> and the steering rack (assuming that you leave the engine bolted in.
> Actually, we even undid the engine mounts.
>
> In any case, I recall one or two different kits that were drilled out for
> the dowel pins. Am I "mis-remembering"?
>
> As a point of reference, I have done at least five of these conversions,
> but prior to last month, it's been close to 20 years since the last
> install. BTW - getting rid of the engine-driven fan is an awesome upgrade
> for TR6's!!
>
> Curious in the Garage.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/forzion7@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20200319/e5bcfbae/attachment.htm>