[Alpines] Release bearing fork

[Paul Heuer]

Andy,
I have a SIII, running the 8.5 in clutch and roller bearing and I  
swapped the pedestal/fork around (tho not sure what actually ended up  
with). In my car if I press the clutch all the way into the carpet  
there is a metal on metal scraping that I suspect is release fork on  
pressure plate. You may want to rig up a test to make sure this  
doesn't happen to you if you are cooking up a combination of parts.

Just checked - there is a *little* more info at:
http://www.geocities.com/motorcity/4081/alpine/my_tech.html#clutch

Good luck,
Paul.