[Bmcu] Headlight adjusters

[Andrew Latus]

Lee,

Do the nuts need to be plastic? If not then that would open up your
options. Otherwise perhaps somewhere like fastenal might be of help. They
certainly would have a larger selection than Lowes etc.

-Andrew

On Tue, Dec 15, 2015 at 6:33 PM, Adamant King <adamant at xmission.com> wrote:

> Lee,
>
> I don't know what shape you need but maybe you could just cut a piece of
> scrap nylon and tap it for the thread?
> --
> Adam.
>
> On December 15, 2015 5:04:24 PM MST, Lee <racergt at xmission.com> wrote:
>>
>> In my continued quest for get my Lotus ready for spring travel, I'm
>> currently redoing the headlight buckets. There are two adjusters in each
>> bucket. On one of mine, both of the nylon (or plastic?) nuts that fit
>> into the headlight bucket are broken. Does anyone know if these are
>> available? I've checked the local parts stores and the ones that they
>> have are WAY too big. All I really need is the nylon part, I still have
>> both of the screws.
>>
>> So, any suggestions?
>>
>> Lee
>> ------------------------------
>>
>> Bmcu at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/bmcu/adamant@xmission.com
>>
>>
> _______________________________________________
> Bmcu at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/bmcu/andrewlatus@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/bmcu/attachments/20151216/bda592e2/attachment.html>