[Bricklin] front end alignment specs

[Kevin Rodgers]

Larry

This is what was circulated awhile ago.

From: owner-bricklin at autox.team.net
[mailto:owner-bricklin at autox.team.net] On Behalf Of Seth
Sent: Thursday, June 05, 2008 8:09 PM
To: John T. Blair
Cc: Bricklin at autox.team.net
Subject: Re: front end alignment

I forget where I got mine... They're close, but not the same:

1975 Bricklin Alignment Spec
Toe: 0.125 deg/side  (; 1/16" /side)
Camber: -0.5 deg
Caster: +2.5 deg


John T. Blair wrote:
> At 07:53 AM 6/5/2008 -0400, Kevin Rodgers wrote:
>
>> Does anyone have the front end alignment spec. handy?  My car is in
the
>> shop and they just called looking for the specs so they can manually
>> dial them in.
>>
>
> Kevin,
>
> Here's what I have:
>
>
>   Alignment
>                    Caster    +3 deg
>                    Camber     0 deg
>                    Toe in    +1/8" (.26 deg or +.125 each side)
>
> John


-----Original Message-----
From: bricklin-bounces at autox.team.net
[mailto:bricklin-bounces at autox.team.net] On Behalf Of Larry Ankeny
Sent: Friday, October 09, 2009 2:46 AM
To: Larry Ankeny
Cc: bl
Subject: [Bricklin] front end alignment specs

I wrote it down somewhere, but I can't find it now.

What are the alignment settings for the 75

caster?
camber?
toe in or out?


thanks all


Larry in LV
#2046
_______________________________________________