Cahc digest, Vol 1 #267 - 2 msgs

[Mobelle65@aol.com]

Re: Alignment
1. re-pack front wheel bearings, or have someone like Tom Eller who knows  
how to shim the bearings apart, do it!!
2. The specs.are for bias ply tires and must be adjusted for radials. Bill  
him-self!! (he's the owner)at Fosters frame is good.
3. Healey break drums are so badly balanced See Foster WHEEL (No connection  
to Foster Frame so, stop confusing your self) Have the splines marked inline  
with the valve stem and balance them in place. It is the only way Ben would  
guarantee his wheel work.
4. Check your steering gearbox for correct oil and idler on opposite side  
(some idiot put grease in the tri-carbs).
5. I'd also check rear end mountings and all shock bolts! I found a loose  
one on olde AWSM doing the pre flight for Nelson run.
                                                                    Hope  
this helps, Jim