Fw: BJ7/8 window regulator

[Richard Bittmann]

Hi All,

My BJ7 is coming right along.  Yesterday I found J&L Fabricating in Puyallup
who will rivet my windshield bracket back together.  That's a big relief.

I nee some advice on installing and adjusting the roll up windows.  I sent the
following message to the Healey List but haven't found the answer yet.  Any
help would be appreciated.

Richard Bittmann BJ7 Tacoma

----- Original Message -----
From: Richard Bittmann
To: Rich C
Sent: Friday, June 30, 2006 5:38 PM
Subject: Re: BJ7/8 window regulator


Rich   You lost me on that.  The Parts List shows an angle bracket but isn't
clear about where it goes and how it works.

Richard Bittmann

----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: "Richard Bittmann" <edmyed@harbornet.com>; "healeys"
<healeys@autox.team.net>
Sent: Friday, June 30, 2006 11:33 AM
Subject: Re: BJ7/8 window regulator


> The same rod that stops the bottom limit is also adjusted to stop the top
> limit.
> Rich Chrysler
>
> ----- Original Message -----
> From: "Richard Bittmann" <edmyed@harbornet.com>
> To: "healeys" <healeys@autox.team.net>
> Sent: Friday, June 30, 2006 2:01 PM
> Subject: Re: BJ7/8 window regulator
>
>
>> Also,  there is stop at the bottom of window travel but is there a stop at
>> the
>> top?
>>
>> Without one the glass is only "stopped" by the rubber tip on the
>> ventilator
>> frame which eventually gets destroyed in the process.
>>
>> Richard Bittmann BJ7 Tacoma