Attention 100 owners

[PlaneZany at aol.com]

Got this off the Healey Chat list:
 
 
  
____________________________________
 From: cnaarndt at gmail.com
To: healeys at autox.team.net
Sent: 10/16/2010  12:12:33 P.M. Pacific Daylight Time
Subj: [Healeys] Limited AH 100 Parts  Run


Hi Gang,

Several years ago I made up a run of 25 sets  of the special bumper 
overrider
bolts for the 100s.  These are a special  7/16" fine thread carriage bolt
that is used to attach the "original"   bumper overriders to the 100
bumpers.  I've been asked repeatedly if I  was going to make more, and so 
I'm
now in the process of seeing if there are  enough people interested for
another run of 25-50 sets; 4 bolts per set (2  long, rear bumper and 2 
short,
front bumper), complete with the proper square  profile spring washer, flat
washer, and nut.

I estimate the cost at  about $40.00 per set, and just like last time I'll
most likely just break  even on the deal, which is why I swore I'd never do
this again... never say  never.

Also, as many of are aware I took over the business of restoring  AH control
heads from Vic Wright of Portland, OR three years ago.   therefore, I'm
investigating with my machinist, the possibility of making up  a limited run
of the canceling rings for the non adjustable control heads  (trafficators.)
A limited number of these was made several years ago out of  bronze versus
aluminum, but this supply is now deleted.  Once again if I  can get enough
folks to commit to these (at least 10) I will go ahead and  have a limited
number of them made up.  The associated wavy washer that  goes with the 
rings
is currently being reproduced by another enthusiast, and  can be included.

I estimate the cost at about $70 for the canceling ring  and another $5 for
the wavy washer.  The more I have made the cheaper  they become.  The last
bronze one just sold for $85 and was used to  complete a control head that I
did for a factory 100M.

I can supply  photos to anyone who's interested, so let me  know.

Cheers,

Curt

PS  I have several non adjustable  control heads for the 3000's for sale if
anyone is interested, complete with  canceling ring, wavy washer and wiring
harness.


Dennis