[Roadsters] Clutch question

[E Scanlon]

You may have a stuck plunger in the master.  Have someone step on the clutch 
repeatedly while you gently but firmly tap on the sides and end of the 
master.  If it is indeed a stuck plunger it should free it up and then 
operate normally.

HTH
E


> Got the Datsun running yesterday thinking that we most likely won't get
> anymore snow here in Wisconsin? When I tried to engage the clutch I had
> no pedal action at all.
> I drained all of the old fluid from the system and used an air hose to
> blow out the lines. I install the bleed screws, filled the system but
> wasn't able to get any fluid into the system for bleeding. I noticed
> that the actuator on the firewall doesn't have a bleed screw on it as
> opposed to the brake system which does have bleed screws. There is a
> plug installed on the bottom of the actuator however. What is this plug
> used for? Any hints on what I'm doing wrong are appreciated.
>
> Steve