[Roadsters] rear brake cylinders

[Pete Peters]

True, but folks have reported replacing the early 11/16 rear wheel cylinders with the later 3/4 (or 12/16) wheel cylinders without issue.

If upgrading an early 11/16 to the later 3/4 (12/16) is okay, maybe upgrading the later 3/4 (12/16) to 13/16 might be okay. I believe 13/16 were used on 510 and 520, maybe other models. Dunno if they'll fit, though.

15/16 are for the all-drum SPL310 and PL411.

Pete

 -------------- Original message ----------------------
From: "John F Sandhoff" <sandhoff at csus.edu>
> > I have read that the 15/16" rears are usable on the later model cars.
> 
> Changing cylinder size will change the balance between front
> and rear brakes, and change the brake pedal travel and force
> required.
> 
> -- John
>      John F Sandhoff   sandhoff at csus.edu   Sacramento, CA
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as ppeters914 at comcast.net
> 
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters