[Roadsters] speedo and tach early 67

[Steve Ehlers]

Gary ,
 You only took care of the secondary seal in the design . If the pinion 
seal was replaced ,you would have solved it at the root cause .
The  cable seals are just that . They are used to keep the cable and 
housing interior clean and uncontaminated .
Pinion seals are available as a new part .The Tach and Speedo cable 
housing seals are Not available as an individual replacement part from 
Nissan .
Remove your Tach cable end  from the stand and tell me there isn't any 
oil in the housing there now .

  So , Cap it with what ? 
Steve

Gary and Cindy Ault wrote:

> Eddie,
>
> Once upon a time, I had an oil leak at the distributor stand where the 
> tachometer (speedo drive pinion?) cable exits, which I traced to a 
> tear in the seal in the end of the tach cable.  Replaced the seal, 
> solved the problem.  Hasn't leaked since.
>
> Do as you wish, but I'd cap it.
>
> Gary