[Roadsters] Carbs, distributor

[keith0alan at aol.com]

Try checking your damper rods (tighten by hand) in the carbs. I have  noted 
several versions and they need to be matched. Also insure your air flow is  
balanced.
 
keith williams
 
 
In a message dated 12/30/2009 2:05:25 P.M. Pacific Standard Time,  
rogerkerschhd at hotmail.com writes:

I am  ready to start the 66 w pertronix, correct springs, 7.5 cam and   
while checking around see that the oil damping of rear carb is   
significantly more than the front. Same ATF in both. I changed  damper  
rods and oil again to no effect. I have 2 other sets carbs, I  guess I  
will change out pistons. I did not mix up with the others  because of  
'Z' needles they had. Anybody have similar  experience/remedy? Thanx on  
distributor advice, that came together  well
Sent from my  iPhone
You are subscribed as  keith0alan at aol.com

Datsun-roadsters mailing  list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters