[Roadsters] flywheel resurface

Joe Kinstle joek at camberconstruction.com
Mon Feb 14 13:16:54 MST 2011


I do believe that the threads are the same on all the bleeders. And you can do
away with the ball bearing and use bleeders with the cone shaped end, at least
I was able to when I switched to speed bleeders.

Joe Kinstle
68 2L
BLK SRL

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of Gordon Glasgow
Sent: Monday, February 14, 2011 12:03 PM
To: 'Tim'; 'datsun-roadsters: autox.team.net'
Subject: Re: [Roadsters] flywheel resurface

If you keep a light coat of oil on it, that will keep it from rusting. Just
clean it off thoroughly before you install it.

I always have flywheels magnafluxed to check for cracks. It's not expensive
and it's cheap insurance.

The brake bleeders are different. I know the attachment won't come through
on the list, but Tim will see it. The front bleeder is on the left.

Description for everyone else: the front bleed screw has a flat end that
pushes up against a steel ball (like a bb). The rear bleed screw has a
pointed end and no bb.

Gordon Glasgow

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of Tim
Sent: Monday, February 14, 2011 4:34 AM
To: datsun-roadsters: autox.team.net
Subject: [Roadsters] flywheel resurface

I am going to have a spare flywheel resurfaced in anticipation of doing the
clutch on my 2000 this spring.

Do I have to worry about it rusting or can I have it done now? Or should I
wait until right before we pull the motor?

Anything else I need to worry about or have checked on the fly wheel while
it is at the machinist?

Still looking for an answer on the bleeders.....

Thanks

Tim
Dairyland Datsuns
________________________________________
Datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/datsun-roadsters/gsglasgow@comcast.net

[demime 1.01d removed an attachment of type image/jpeg which had a name of
Brake_Bleeder_comparison.jpg]
________________________________________
Datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/datsun-roadsters/joek@camberconstructio
n.com


More information about the Datsun-roadsters mailing list