[Roadsters] Starter

[Gary and Cindy Ault]

Two ways (redundant):  1) Through the starter body, through the engine, to 
the frame, and 2) from the starter flange bolt directly to the frame. 
You'll find a small opening in the frame adjacent to the starter, which has 
a captive nut inside the frame.  The frame end of the staarter ground cable 
attaches there.  The starter ground cable is about 1/4-inches in diameter. 
The starter will perform all right without the separate ground cable, but I 
added one to my '67-1/2, which did not have separate cable when I bought it.

Gary

----- Original Message ----- 
From: "Domingo Castilleja" <mingocast at gmail.com>
To: <datsun-roadsters at autox.team.net>
Sent: Saturday, April 07, 2012 9:49 PM
Subject: [Roadsters] Starter


>I have a 1970 datsun spl311. Can you tell me how the starter is grounded.
> mingocast
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net