[Roadsters] rear brakes early 67 low windshield

[Ronnie Day]

All you need to do is remove the shoes, then unfasten the hard line on the
back side of the wheel cylinder. The cylinders on my '70 is held in place
by several slide-in clips that go into slots cast in the cylinder body. Pay
close attention to the order these clips are in. There are exploded views
of all of this on 311s.org.

The hardest part of the process for me was a previous owner had totally
messed up the flare nut holding the hard line in place. I ended up
replacing the hardline, too, which wasn't cheap.

On Thu, Aug 18, 2016 at 10:54 AM, dave n via Datsun-roadsters <
datsun-roadsters at autox.team.net> wrote:

> I have to replace the rear cylinders on my roadster.
>
> looks like you loosen the rears, then use a puller to pull off the hub?
>
> with that shield back there, how do you do this without damaging them?
>
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/datsun-roadsters/
> ronnie.day at gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20160818/79f8cdad/attachment.html>