[Roadsters] [Shop-talk] Choosing a wood

[Pat Horne]

Looks like Interstate still has the 24c. They call it the C24-XHD. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jul 22, 2019, at 10:27 AM, Robert Nogueirao via Shop-talk <shop-talk at autox.team.net> wrote:

I’m looking for suggestions as to what type of wood to use for a project.
I’m making some small wood models.  I’ve tried Bass wood, my wife uses it for her carving, but it is too soft and does not hold edge detail well. White pine is working but the soft wood in the grain seems to create the same problem as bass wood. 
The pieces I’m making are only 1/8 inch thick an 3/8 wide so cutting is not a problem.
Any suggestions as to a tight grain wood which is hard enough to hold a edge?
Bob Nogueira 
_______________________________________________

Shop-talk at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com