[Roadsters] front rotors

[Pat Horne]

Remove the calipers, bearing dust caps, spindle cotter pins & nuts. Pull the hubs w/rotors. 

Remove grease seals & bearings. 

That’s it. 

Check the rotor thickness to be sure there is enough thickness to turn. Mine say 9.4mm on them. If you need to replace the rotors there are instructions in the tech wiki. 

Peace.
Pat

Pat Horne 
We support Habitat for Humanity


On Jul 13, 2021, at 5:01 PM, dave via Datsun-roadsters <datsun-roadsters at autox.team.net> wrote:


any instructions out there on how to remove the front rotors on an early 67 datsun roadster?  I would like to get them turned before replacing the brake pads.
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/datsun-roadsters http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/datsun-roadsters/patintexas@icloud.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20210713/db7470ca/attachment.htm>