[Fot] Mikuni jets?`

Bill Babcock billb at bnj.com
Mon Apr 23 01:40:51 MDT 2007


I've got a set of those myself that I took off a Toyota 2TG motor and  
ran for quite a while on my cheater TR3. Pain in the ass to tune, as  
I recall the air corrector jets are backwards to Weber practice of  
leaning the mix as the number goes higher. Also of course you can't  
borrow anything from fellow racers--weber parts don't fit.

As I recall I got all the bits from Mikuni USA, but I finally gave up  
on the carbs as too much hassle.
Bill Babcock
billb at bnj.com
bnj  Website for Babcock & Jenkins, a direct and interactive agency

You can subscribe to my Blogs
Via email:
All Aluminum Tour: Touring and racing classic North American tracks.  
http://www.feedblitz.com/f/?Sub=168395
Ponohouse : Living and playing in Maui. http://www.feedblitz.com/f/? 
Sub=168304

or Via RSS
Ponohouse: http://feeds.feedburner.com/PonoHouse
AllAluminumTour: http://feeds.feedburner.com/AllAluminumTour



On Apr 22, 2007, at 11:20 PM, Mark J. Bradakis wrote:

> We've got a fellow here in Salt Lake with a Mikuni clone of a Weber
> DCOE on his MGB.  Anyone have a good source of jets for these carbs?
> I've got a zillion Weber bits, some Dellorto, but nothing for Mikunis.
>
> Thanks,
> mjb.
> _______________________________________________
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot



More information about the Fot mailing list