[Fot] gapless rings

[Larry Young]

Oops, that's the part number for conventional rings, the gapless ring is 
T9416.  For 89mm use T2675-1.  These are for pistons with 1.5/1.5/4.0 mm 
gaps.

Larry Young wrote:

> I've used Total Seal rings on my 87mm TR4 motor, but not enought to 
> get a fair reading of their value.  The part no. is CR9416.  You can 
> also get them off the shelf for 89mm, but I'd have to look up that 
> part number.
> Larry Young
>
>> Subject: Re: [Fot] gapless rings
>>
>> I didn't know these were available for Triumphs.