[Fot] dual circuit brakes on a tr4

[Joe Curry]

I noticed the same thing when I installed  two Single circuit master
cylinders and the Tilton balance bar on my Spit.  The petal is much harder
and requires more effort to brake than before.  I previously had a dual
circuit GT6 master cylinder installed and wanted to gain a bit more control
on the front/rear balance.

Joe C.

----- Original Message ----- 
From: <WEmery7451 at aol.com>
To: <markvaden at gmail.com>; <fot at autox.team.net>
Sent: Friday, November 02, 2007 9:34 AM
Subject: Re: [Fot] dual circuit brakes on a tr4
> I was surprised the first time out on the track with this system.  I had
to
> push the brake peddle a lot harder to get the same effect.