[Fot] Source for oil pan studs and pictures of crank scraper/windage tray

[Jim]

Chuck,

Those studs are just long set-screws.  Any decent industrial supply house
should be able to provide them (pop one out and measure the length) or you
can get them from McMaster (www.mcmaster.com).  And the shouldered nuts
also.

Or if you can wait until after Tamale day I'll check locally.  We used them
all the time at my previous job.


Cheers,

Jim
Dallas
'76 DM Spitfire
and a few other toys ;)
-----Original Message-----
From: fot-bounces+britbits=tiu.net at autox.team.net
[mailto:fot-bounces+britbits=tiu.net at autox.team.net] On Behalf Of Chuck
Arnold
Sent: Thursday, November 15, 2007 12:34 PM
To: Friends; Triumph
Subject: [Fot] Source for oil pan studs and pictures of crank
scraper/windage tray

A while back I bought a set of stainless steel studs for the TR6 oil pan.
These had Allen head holes on the ends to drive them in,  and stainless nuts
with flanges.  Does anyone know a source for this kit?

Also, you can see pictures of it, and the crank scraper and the windage tray
I had installed on my racing TR6 engine at:

http://picasaweb.google.com/Triosan/WindageTrayScraprerAndStuds

--
Chuck Arnold
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot