[Fot] Crank Scrapers and Cam Lubrication

[John.Reed at wilson.com]

Henry,

I put on a crank scraper with my last rebuild.
I swear the engine spun quicker.


Regards,
John Reed
Staff Photographer
 
Wilson Sporting Goods Co.
8750 W Bryn Mawr Ave, Chicago, Illinois 60631, USA
Tel. + 1.773.714.6895, fax +1.773.714.4585
John.Reed at wilson.com  www.wilson.com  www.amersports.com
 
Please note that effective immediately, my e-mail , phone number and 
street address have changed. Please update your files accordingly.



"Henry Frye" <henry at henryfrye.com> 
Sent by: fot-bounces+john.reed=wilson.com at autox.team.net
11/16/07 05:46 AM

To
"Bill Babcock" <BillB at bnj.com>, <fot at autox.team.net>
cc

Subject
Re: [Fot] Crank Scrapers and Cam Lubrication






OK, Bill, I hear you. Thanks...

I am having difficulty visualizing two quarts of oil being wound up on
the crank, though!

> -----Original Message-----
> From: Bill Babcock [mailto:BillB at bnj.com]
> Sent: November 15, 2007 4:33 PM
> To: Henry Frye; fot at autox.team.net
> Subject: RE: [Fot] Crank Scrapers and Cam Lubrication
>
> probably that it's more chaotic than you would believe, and a
> crank scraper really just pulls the oil off the crank--it
> doesn't do that much to reduce chaos. You can easily wind two
> quarts of oil onto a crank--think of that weight
>
>
> -----Original Message-----
> From: Henry Frye
> Subject: [Fot] Crank Scrapers and Cam Lubrication
>
> What am I missing???
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot



This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.