[Fot] TR6 piece between radiator and motor

Bill Babcock Billb at bnj.com
Sat Aug 16 11:24:40 MDT 2008


Lots of ways to adjust camber on a TR3/4/5/6, this is certainly a good  
one. It would be best to anchor the bar in the middle so you could  
adjust each tower separately, but what the heck. The bar is absolutely  
necessary if you want your car to handle well, otherwise it will have  
variable camber as the towers bend in and out. Not good.

On Aug 15, 2008, at 10:49 AM, Dennis DeLap wrote:

> Joe - I have not seen a picture of your invention.  Does it allow  
> you to pull on the right and left tower independently?
>
>  Dennis
>
>
> N197TR4 at cs.com wrote:
>  In a message dated 8/14/2008 4:29:34 PM Central Daylight Time,
> RKramer at rdoequipment.com writes:
>
>
>> Joe Alexander had a custom brace on his car at Road America last  
>> year, a
>> test model of something he was thinking about selling. A custom  
>> designed
>> piece
>> like Joe's might be an aesthetic upgrade and solve your problem. He  
>> should
>> chime in any time now.....
>>
>>
>
> I have a aluminum tube that is anodized 'gold'.
> It has been in the car for two years.
> It is straight across as it doesnt have to miss any moving parts.
> It can be removed with one bolt and unscrewed from the other side.
> It can be adjusted (RH/LH Threads) to change camber.
> Kas liked it...(he took the tubes and sectioned them to induce more  
> camber)
> Uncle Jack likes it. But hasnt done it yet....not a high priority.
> But it is easy to do and inexpensive.
> (far easier than doing a production run of steel flywheels)
> It does a plethora of things and it looks trick. (People might have
> differing opinions about this method of camber adjustment, but I  
> like it)
>
> If there were enough interest, I could put some kits together on a  
> one time
> basis (this winter) otherwise I have no plans for production.
> Thanks Mr. Kramer. I am pleased it caught your eye.
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com



More information about the Fot mailing list