[Fot] webbers 40 dcoe

[Allen Washatko]

Rob,

I run triple 40 DCOE Weber's and never exceed 2 psi. Weber's are very 
sensitive to fuel pressure. I was told to run between 1-1/2 - 2 psi.

Check with Pierce Manifold at: http://www.piercemanifolds.com/ for 
questions regarding your pump jets. They are most helpful.

Allen

On Mar 15, 2008, at 5:16 PM, Rob wrote:

> On  a pre season start  up check for gas leaks I am finding   a fair 
> amount of
> raw fuel from the pump jet dripping into the throat. Will to much fuel
> pressure cause this? The pump jet washer does not look great and seems 
> to be
> made of aluminum. The washers all look to be in the same condition. 
> Does the
> pump jet cover push down on the pump jet and seat it into the carb. 
> body?
> Needle and seat are 2 years old and everything was running fine 8 
> months ago.
> I believe the float adj. is correct but has not been checked today
> The fuel pressure has not been  changed sense last season but the 
> gauge is
> busted and I am on my way out to get a replacement.  Could the fuel psi
> regulator given up?  It was last adjusted for 3lbs .Any suggestions 
> would be
> great   thanks   rob
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as awashatko at wi.rr.com
>
>
Jody & Allen Washatko
N65 W5567 Columbia Road
Cedarburg, WI. 53012
USA

tel. (262) 375-6888