[Fot] Scatter Shield ??

[Charly Mitchel]

		I'm curios about what efforts you've invested to remedy the problems
associated with the TR6 crank problem.  Can you share with me?
I've purchased
a Cambridge flywheel and had it machined to accept a Tilton clutch  I will be
balancing the entire motor and do whatever else I can. I have been paranoid to
go over 6000 rpm.
Charly Mitchel
TR6 #44
----------------------------------------

				From: Allen Washatko
<awashatko at wi.rr.com>
Sent: Sunday, March 16, 2008 9:16 AM
To:
vanlake at bellsouth.net
Subject: Re: [Fot] Scatter Shield ?? 

I've invested
alot of effort in making sure that the flywheel issues 
are handled. The last
teardown looked very good. I usually shift at 
6800-7000 rpm but have been
know to run as high as 7500 when necessary.

Allen

On Mar 16, 2008, at
10:25 AM, vanlake at bellsouth.net wrote:

> Reading many of these threads, you
can't help but notice the REV"S are 
> now expected to be in the+7500 range.
Are any of the TR6 drivers 
> using a protectice device on the bellhousing?
You can't help but 
> notice where the clutch and flywheel are located in
respect to your 
> feet and ankles. Is there a product or DIY device that any
of you are 
> using? didn't see the old familar Kelvar blanket wraps in the
current 
> Summitt catalog.
>
_______________________________________________
>
http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as
awashatko at wi.rr.com
>
>
Allen & Jody Washatko
1971 TR6 - Number 6
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

You are subscribed as
charly at mitchelplumbing.com