[Fot] TR4 rear main seal

[J.C. Hassall]

I need to change the main bearings in my TR4.  The engine is in the 
car with the gearbox attached.  Is it possible to pull the rear main 
cap?  I'm specifically concerned about the seal - I have the new 
split-type seal.  I took lots of pix of the engine as I assembled it 
*except* the split seal and associated bits.

TIA

jim

--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go