[Fot] Clutch master cylinder to AN adaptor

WILLIAM TOBIN william.tobin3 at verizon.net
Mon Apr 6 15:55:48 MDT 2009


  Hi, Pegasus has a good supply of adapter fittings. I'm looking at a
similar situation.
  Bill----- Original Message -----
  From: "George Harmuth" <harmug at us.ibm.com>
  To: <fot at autox.team.net>
  Sent: Monday, April 06, 2009 2:12 PM
  Subject: [Fot] Clutch master cylinder to AN adaptor


  > I'm replacing the clutch master cylinder in my Spitfire and I need an
  > adaptor so I can use the existing #4 AN hose. The current adaptor looks
  > like it was kind of forced into the hole, the threads are all boogered
up.
  > I'd like to do it right but I can't find a 3/16 brake line to #4 AN
  > adaptor. I could drill out the hole and make it a standard NPT size
which I
  > can get an adaptor for but I'd prefer to adapt it so I can carry a
standard
  > master as a spare. Does anyone have a part number or a source for this?
  > Any other ideas?
  >
  > thanks
  > mike
  > _______________________________________________
  > Support Team.Net http://www.team.net/donate.html
  >
  > http://www.fot-racing.com
  >
  > Fot mailing list
  > Fot at autox.team.net
  > http://autox.team.net/mailman/listinfo/fot



More information about the Fot mailing list