[Fot] TR3 suspension question

[alfetta95 at optonline.net]

Dave,
 
FWIW  I flipped the lower arms on my 3 when rebuilding the front end.  It does give you an extra 1" lower.  I read about it in a book that I think is called "How to improve the Triumph TR3",  

Haven't tested it yet as I have no rear end, engine completely apart, body off chassis etc.

Hope it works!
Todd Redmond
Triumph TR3

----- Original Message -----
From: Dlhogye at aol.com
Date: Tuesday, June 2, 2009 8:45 pm
Subject: [Fot] TR3 suspension question
To: Fot at autox.team.net

> Hello Fot,
> I'm beginning to set up the front suspension of my TR3 for 
> racing. Is it
> possible to use a TR6 trunnion and bushing kit on TR3 lower 
> control arms.
> It is my understanding that the TR6 trunnion lowers the front 
> about an inch.
> Of course the upper arms from TR4A-TR6 would be used. Also, does 
> anyone know
> if it's possible to flip the TR3 lower control arms to lower the 
> front. I
> can see that doing so would lower the front, about a half inch, 
> this also
> lowers the spring pan. Does anyone have any tips for this type 
> of set up?
> Thanks,
> Dave H.
> 
> 
> **************
> We found the real bHotel Californiab and the b
> Seinfeldb diner. What will you find? Explore WhereItsAt.com.
> (http://www.whereitsat.com/#/music/all-spots/355/47.796964/-
> 66.374711/2/Youve-Found-Where-Its-A
> t?ncid=emlcntnew00000007)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> http://www.fot-racing.com
> 
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot