[Fot] carillo rods

[rkrantz77 at comcast.net]

FWIW, my experience with carillo is not very good.B  I would offer Pauter Rods
as an alternative to carillo (I have no connection to Pauter).B  Carillo
admitted to me that they weigh total and big end and then subtract and report
small end weight of rods.B  If anyone is interested contact me off line.

Ron K.

ReK Racing
----- Original Message -----
From: "David Talbott" <dtalbott at archrepro.com>
To: "steve" <colordog.1 at earthlink.net>, "Bob" <rdavis4 at cfl.rr.com>, "Friends
of Triumph" <fot at autox.team.net>
Sent: Friday, June 19, 2009 7:17:54 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Fot] carillo rods

Make sure you know which generation of Carrillo's, as I believe they have
produced at least two styles for the tractor motors. B I have an older set
that is:

Total: B  B  B  B  B  B  B  B 719
Rotating: B  B  B  B  B  523
Reciprocating: B  196

DT

----- Original Message -----
From: "steve" <colordog.1 at earthlink.net>
To: "Bob" <rdavis4 at cfl.rr.com>; "Friends of Triumph" <fot at autox.team.net>
Sent: Friday, June 19, 2009 2:25 PM
Subject: Re: [Fot] carillo rods


>4 PRO-H TM-TR4>-66250S 3/8 CARR 6.250 1.060 1.175 2.2330 0.875
>
> Total Rotate Recip
> 664 / 480 / 184
>
>
>
> -----Original Message-----
>>From: Bob <rdavis4 at cfl.rr.com>
>>Sent: Jun 19, 2009 12:44 PM
>>To: Friends of Triumph <fot at autox.team.net>
>>Subject: [Fot] carillo rods
>>
>>For a TR3 motor, what is the typical weight of Carillo rod?
>>
>>thxx,
>>Bob
>>_______________________________________________
>>Support Team.Net http://www.team.net/donate.html
>>
>>http://www.fot-racing.com
>>
>>Fot mailing list
>>Fot at autox.team.net
>>http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot