[Fot] TR3/4/5/6 Syncro Cups

[Larry Young]

Jeff,
I don't see any other responses, so I'll give it a shot.

Sam Clark and I noted this problem in our transmission rebuild articles 
at vtr.com.  This is a case where new is not always better. I measure 
them first and reuse them if they are not worn out. If you have to 
replace them, Victoria British seems to have the worst ones.  The ones 
from the other dealers are usable, but worse than the originals. This is 
based on experience from a few years back.  I have not tried the premium 
ones.  They must be relatively new.  I have bought NOS sychro rings on 
ebay.
Larry

jeff_durant at comcast.net wrote:
> I'm rebuilding a CR gearbox for my TR6 using a Kastner gearset and realized I used my last factory syncro cups on another CR gearbox build.  Who offers the best (closest to factory) syncro cups for the big TR's these days? I've tried Moss cups I'm my brother's TR4A trans rebuild and they were marginal.  Anyone tried the TRF or Rimmer's premium ones?
> Thanks,
> Jeff D.
> TR6 #12
> Sent via BlackBerry by AT&T
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as cartravel at pobox.com
>
> http://www.fot-racing.com
>
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.