[Fot] 7/16 TR4 rear wheel studs

[rdavis4 at cfl.rr.com]

There is an ARP that have splines that slightly to large. I turn them on a lathe to make the spline fit and then put a touch of weld on the back side as security.

Bob
---- Joe Curry <spitlist at cox.net> wrote: 
> Brad,
> If you go metric, it will open a whole wealth of options.  Take an old stud
> to your local auto parts store and ask to look in their Dorman's catalog.
> You will look for the one that fits the shank and is the length you want.
> 
> Joe C.
> 
> -----Original Message-----
> From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
> Behalf Of Brad Kahler
> Sent: Monday, May 03, 2010 5:20 AM
> To: Friends of Triumph
> Subject: [Fot] 7/16 TR4 rear wheel studs
> 
> Amici,
> 
> I'm looking for some longer rear axle (stock axle & hub) wheel studs
> for my TR4.  I would like some that are about 2" long that are 7/16-20
> thread that would replace the stock wheel studs without modification.
> 
> Any suggestions?
> 
> Thanks,
> 
> Brad
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com