[Fot] Torque specs needed ASAP!

[Barr, Scott]

Barry's right on the chamfer of the bolt holes to clear the radius under the new bolt head.  I bought new ones last year as direct replacements for the old ARP bolts.  The heads popped off of three of them in the first session.  We now have chamfered bolt holes.

Scott B.

----- Original Message -----
From: Barry Munson <barry at penybryn.ca>
To: Barr, Scott
Sent: Sat Apr 02 12:30:58 2011
Subject: RE: [Fot] Torque specs needed ASAP!

Hi Brad - FYI - As I'm in the process of installing the flywheel on my TR3
motor using ARP flywheel bolts, the instructions emphasize the following:
"Do NOT use any washers with ARP Flywheel Bolts. They are designed to be
installed without them. ARP will NOT be responsible for failure resulting
from using a washer with this kit. Make sure that flywheel bolt holes are
chamfered adequately to clear radius under the head of the bolt."
Torque specs are as Scott has indicated.
Barry. 

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Barr, Scott
Sent: April-01-11 8:57 PM
To: brad.kahler at 141.com; fot at autox.team.net
Subject: Re: [Fot] Torque specs needed ASAP!

The ARP instruction sheet should come into play here.  Mine says 40 lb/ft
with ARP Moly Lube or 60 lb/ft with 30 weight.


----- Original Message -----
From: fot-bounces at autox.team.net <fot-bounces at autox.team.net>
To: Friends of Triumph <fot at autox.team.net>
Sent: Fri Apr 01 19:29:37 2011
Subject: [Fot] Torque specs needed ASAP!

I'm hoping someone will have a good idea of what torque to use for
fastening the flywheel to Susan's 1300 Spitfire motor.  It has a
Moldex crank, aluminum flywheel and ARP bolts with ARP washers.  The
thread size is 3/8x24.  I will also be using loctite during the
install.

Any suggestions on torque spec?

Thanks!

Brad
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/scott.barr@mccarty-law.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/barry@penybryn.ca