[Fot] improved springs for GT6

[Chuck Arnold and/or Kathleen Kelley]

I bought hypercoilds for front [600 6" tsll] and rear [800 8"].  Had
e-Machine shop create spring perrchs as these springs are too narrow to sit
on ours.  Will be installing heem in a couple of weeks and will post some
pictures.  In switching computers I ended up loosing the drawing I did.  The
ones for the front each provide 3/4" height, so effective spring length is
now 7.5".  I can slip in varios thickness washers to allow for weight
jacking should I ever get that sophisticated.  Get it running, relearn to
drive are actions one and two when I retire in two weeks.

On Thu, Jul 14, 2011 at 6:55 PM, Bobby Whitehead <igofaster at att.net> wrote:

> Looking for a source for 600 pound springs for the GT6...
>
> Bobby Whitehead
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/triosan@gmail.com
>
>
>


-- 
Chuck Arnold and Kathleen Kelley