[Fot] Plumbing question

[robert bownes]

If you plumb it to an adapter and the filter has a one way valve, put it
after the adapter. Otherwise, you are going to need a one way valve to keep
it from backflushing the oil pump when you turn it on to prelube the engine
before startup.  ISTR putting a one way valve in when I built mine, though
it was nearly 15 years ago...


On Mon, Jul 25, 2011 at 2:26 PM, KEVIN LYNCH <klynch_6 at msn.com> wrote:

> Perhaps the group can settle this.
>
> If one wanted to plumb an accu-sump directly from ball valve to motor that
> has
> a 'with cooler' type of spin-on filter adaptor.
> a)Which port would be the one to plumb to or would it make any difference?
>
> b)Would you need to introduce a one-way valve to the mix?
>
> Just shooting for simplicity here & not the budget!
>
> thanks!
>
> Kevin
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com