[Fot] TR4 camshaft bearings & clearances

[Alexandre Camoletti]

Thank you Randall, I must have been tired when checking out.
in fact VIZARD recommends to go for clearances at the lowest end (while for
a race engine one would tend to go for the larger clearances), to ensure
timing precision

-----Message d'origine-----
De : fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] De la
part de Randall
Envoyi : mercredi 1 juin 2011 19:18
@ : fot at autox.team.net
Objet : Re: [Fot] TR4 camshaft bearings & clearances

> I found these figures  in David Vizard, Tuning Triumphs over 1300cc,

The same figures (pretty close) can be found in the factory TR2/3 workshop
manual, page B3 (or page 87 of the Bentley reprint).

-- Randall
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/ac@camoletti.ch