[Fot] What devices are you using?

[Jim Norlin]

I use an ancient UniSyn for setting idle, but the hose works pretty well 
also.  However, that is just for idle and balancing.  For racing 
purposes you need an exhaust gas sniffer, exhaust temp probes for each 
carb,  a chassis dyno and a dyno operator that knows race car tuning.  
Cheapest horsepower you will ever get and the peace of mind knowing that 
you're not going to burn a hole in a piston.  I also run an EGT probe 
all the time to help me make minor changes (a couple of flats up or 
down) to the SU's based on temperature, humidity and altitude changes.

On 6/28/2011 8:27 PM, Scott janzen wrote:
> Piece of 1/2" heater hose and your ear.  Easy to tell variances
>
> Sent from my iPhone
>
> On Jun 28, 2011, at 8:41 PM, sherry robyn<sherryjimmy6116 at att.net>  wrote:
>
>> What devices are you guys using for tuning and syncing carbs?
>>
>> Jim in Folsom, CA
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/sjanzen@me.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/norlinengineering@comcast.net