[Fot] Unusable tr4 cylinder head wanted

[Tim Murphy]

I believe we have a head that you could use.  It is cracked and has about
.200 or more milled off of it by the previous owner.  I'd have to check the
numbers on the head to make sure it is what you are looking for and could
send a photo also.  We are in Wisconsin so the shipping charge might be a
bit high.

Tim

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Jim Gray
Sent: Wednesday, October 03, 2012 10:37 PM
To: fot at autox.team.net
Subject: [Fot] Unusable tr4 cylinder head wanted

Greetings FoT

As the subject line suggests I'm looking for an unserviceable hi port tr4
head.  Were going to be doing 

some flow bench work in the coming months and would like to cut some cross
sections of the ports

for development purposes. Of coarse we will share the data we gather from
the flowbench.

Thanks for any leads,

jim g.
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com