[Fot] Zenith-Stromberg needle specs

Stutzmans stutzmans at comcast.net
Sat Sep 1 13:28:06 MDT 2012


Strombergs operate with a deeper jet level than we're used to with SUs. 
Early TR6 carbs have a jet level of .080 below the bridge.  Late TR6 carbs 
use a jet level of .125 below the bridge.  You should first drop the jets to 
.125 for increased richness.  Then try the XKE B1E needle.
Bruce
----- Original Message ----- 
From: "Larry Young" <cartravel at pobox.com>
To: "Kas Kastner" <kaskas at cox.net>
Cc: "fot" <fot at autox.team.net>
Sent: Saturday, September 01, 2012 1:15 PM
Subject: Re: [Fot] Zenith-Stromberg needle specs


> Thanks for locating the spreadsheet, I will get a copy so I can compare
> it to the SU charts that I have.  The ones in Kas' book should give a
> starting point.  This is for a TR250 street car, which I want to warm up
> but maintain an overall stock appearance.  I want it to be like it would
> have been if not for the emission requirements.  More or less like the
> 128 mph demonstration car Kas did back in the day.  I've taken the
> compression ratio to 9.5 and put in a longer duration cam (BP270).  I
> have yet to do anything to the carbs, so I'm still running the fixed
> needle Z-S. I want to stick with Z-S to maintain the stock appearance,
> but will need to switch to some adjustable ones or make these adjustable
> (see Buckeye Triumphs).
>
>
> On 8/29/2012 6:38 PM, Kas Kastner wrote:
>> just a reminder that on page 110 of my book the "Handbook" there is a
>> chart of the needles we used with great success in  the 1.5" carbs..
>> These are STROMBERG needles. Lots of number to compare. By the way
>> that is .006" shim stock you need to use an S.U. needle.
>>
>> Never be beaten by equipment
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/stutzmans@comcast.net



More information about the Fot mailing list