[Fot] Oil collecting on TR6 valve cover

[Bill Tobin]

Pegasus sells an item called Stat-O-Seal. They work great; an aluminum 
washer with a built in inner seal. PN 3245-5/16 for the TR6; around $1.60 
each. Other sizes go from #6 to 1".
They work great. I gave one to a Corvette guy at the Glen last weekend and 
it fixed his problem.
800 688-6946 or PegasusAutoRacing.com
NFI
Hope this helps.
Bill----- Original Message ----- 
From: "sherry robyn" <sherryjimmy6116 at att.net>
To: "Bud Rolofson" <levilevi at comcast.net>; "Mark J Bradakis" 
<mark at bradakis.com>
Cc: <fot at autox.team.net>
Sent: Monday, September 17, 2012 4:24 PM
Subject: Re: [Fot] Oil collecting on TR6 valve cover


> Hi Bud,
>
> I finally got around to rounding up some of these for my TR6s.  I
> called a Honda
> parts dept. and they say that this is not a good number for
> them.  Do you have
> any other particulars such as a Honda model that uses
> them, etc?  They also say
> they need to order them so I can't just measure
> them in the bin.
>
>
> Thanks, Jim
>
>
>
>
> ________________________________
> From:
> Bud Rolofson <levilevi at comcast.net>
> To: Mark J Bradakis <mark at bradakis.com>
> Cc: fot at autox.team.net
> Sent: Sat, June 30, 2012 12:06:23 PM
> Subject: Re: [Fot]
> Oil collecting on TR6 valve cover
>
> That Honda Part # is 90541-371-000.  I've
> had great luck stopping leaks out the
> cover bolt holes with these.
>
>
> Bud
> Rolofson
>
> 71TR6 CC57365 (Good 6)
> 66TR4A CTC57806 (The Wreck-Almost parts)
> 66TR4A CTC57529 (The Project)
> 71F-250 Camper Special (Triumph Support Vehicle)
> Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
> levilevi at comcast.net
>
>
>
>
> On Jun 26, 2012, at 2:13 PM, Mark J Bradakis wrote:
>> There is a Honda Goldwing valve cover seal that is a perfect fit for the
>>
> stock TR valve covers, I know I have the part number written down
>>
> somewhere.  I am fairly certain that Ted S. also sells them.  This is one
>>
> area where too many people think that if a little is good, more is better.
>>
> I've seen a LOT of distorted valve covers due to overtightening.
>>
>> mjb.
>>
> _______________________________________________
>> fot at autox.team.net
>>
>>
> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>>
> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/levilevi@comcast.net
> _______________________________________________
> fot at autox.team.net
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive:
> http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/sherryjimmy6116@att.net
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net