[Fot] VR-1 Oil

[yellow04 at tr4racer.com]

http://www.valvoline.com/pdf/vr1_racing.pdf

VR-1 carries an API rating of "SN". This is the most current standard.

A couple years back when the whole flat tappet cam failure issue was in full 
swing, somebody explained it to me this way...

The problem was caused when our government made mandates involving additives 
to motor oil. They didn't want stuff in the oil of our daily drivers that 
tended to plug up catalitic converters and perhaps gum up sensors. It's all 
about emmissions and mileage, the idea of protecting an engine as best we 
can is no longer the top priority. So the API ratings for motor oil were 
amended to limit how much good stuff goes into the additive packages. .

Real racing oil has no API rating, it can't qualify for one. The additive 
packages we want are outside the limits set by the API.

It's your engine, run whatever you like, but rest assured the VR-1 you buy 
today is a distant relative of the VR-1 you ran when the bottle had an API 
rating of "SJ".

Henry
yellow04 at tr4racer.com