[Fot] Electric connections

[Mark J Bradakis]

Tony Drews wrote:
> I solder anything I can.  I usually run some heat shrink tubing over 
> the joint between the connector and the wire after soldering.

For connections that won't allow heat shrink tubing, I usually use the 
liquid electrical tape,
as they call it.   Well, I did forget once when hooking up a single wire 
alternator on Killer
right before a race.  That was the one where the wire came loose and did 
an electric
discharge machining job on my front brake line.  Festive!

mjb.