[Fot] Rear camber for a TR6

[Sam Halkias]

I cured this problem with an entire re-worked double A-arm rear suspension on
my SCCA car. But on my other race TR6's I would actually set my rear camber
with a half degree POSITIVE camber to help keep the car from excessive
negative camber under power.

Sam Halkias

On Feb 6, 2013, at 1:03 PM, "Robert M. Lang" <lang at isis.mit.edu> wrote:

> Hi - 2 degrees negative may work for radials, but that's too much camber for
bias tires. Plus, as Kas pointed out, the dynamic camber change on the TR IRS
is pretty big...
>
> regards,
> rml
> ---------------------------------------------------------------------------
> Bob Lang              Triumph TR6!!            |  This space for rent
> Former NER Solo Chair                          |
> Voice:617-253-7438                             |  Cell: 339-927-4489
> ---------------------------------------------------------------------------
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/atr6racer@hotmail.com