[Fot] TR4 clutch, help

[jason at multivintage.com]

I would be most interested in what the slave is actually doing when you press the peddle. At least That will tell you if its 'before' or 'after' that point.
J.O. FGR. 
------Original Message------
From: Mike Moore
Sender: fot-bounces at autox.team.net
To: 'FOT'
Subject: [Fot] TR4 clutch, help
Sent: May 9, 2013 7:01 PM

This is for my race car that I am getting ready for Jefferson 500.

 

I had to put in new clutch master (Wilwood 5/8, same as was in car), and new
slave (stock from Roadster factory.

 

With car running when I try to engage gear I have to push clutch all the way
to floor, works in last half inch, but then the clutch pedal sticks and
won't come back up.

 

I have bled a lot and don't see any more air bubbles.

 

Do I need to adjust rods on either cylinder or is it air.

 

Thanks

Mike

 

Michael T. Moore, CPA

2007 West 32nd Street

Erie, PA 16508

 

Phone: 814-868-4831  ext 103

Fax:        814-864-7383
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason@multivintage.com



Sent via BlackBerry by AT&T