[Fot] TR4 rear spring question

[Randall]

> can anyone help me with the height of the spacer block that 
> was used on
> some TR4 rear springs.

The ones I have, which I'm fairly certain are from a later TR4, are pretty close to 3.5".  But I don't know what the differences are
with the solid axle TR4A version.

> how do I identify the different springs?

Lay the spring on the floor with the eyes down, and measure from the spring at the through-bolt to the floor.  The early springs
will only have about 4 inches, the later ones 7.5.

But again, I don't now about the solid axle 4A version.

Randall