[Fot] Fw: Fw: Fw: Detroit Locker

[Joe Alexander]

If I understand what you said, there may be a need for a 'finish' grind
following heat treat.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Feb 27, 2014, at 6:55 AM, "Robert M. Lang" <lang at isis.mit.edu> wrote:
>
> Just another thought... looking at the DL that I have, it looks like it's
forged steel that's machined on the bearing surfaces and the gear mounting
flange. How would you surface treat a machined piece to get the surface
hardness needed for this sort of application?
>
> regards,
> rml
> ---------------------------------------------------------------------------
> Bob Lang              Triumph TR6!!            |  This space for rent
> Former NER Solo Chair                          |
> Voice:617-253-7438                             |  Cell: 339-927-4489
> ---------------------------------------------------------------------------
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com