[Fot] TR4 Valve Guide Clearance

[Marcel Van Mulders]

In the Triumph Service Instruction Manual, 0.001" to 0.003" is recommended.
Maybe steel valve guides will cause no problems,but I believe bronze guides
should be reamed to the original size  after fitment
Marcel
-----Oorspronkelijk bericht-----
Van: Fot [mailto:fot-bounces at autox.team.net] Namens Michael Moore
Verzonden: donderdag 19 juni 2014 14:21
Aan: FOT
Onderwerp: [Fot] TR4 Valve Guide Clearance

Is there a recommended clearance for valve guides? I may have a valve
sticking.

Engine builder just put in oversized valves and new guides.


Thanks
Mike

62 TR4, Race car
63 TR4, Street car

Mike & Becky Moore
6050 Ruhl Road
Fairview, PA 16415

[demime 1.01d removed an attachment of type image/gif which had a name of
image001.gif] _______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be