[Fot] TR3 Inner wheel bearings

Todd Redmond alfetta95 at optonline.net
Tue Sep 16 12:14:18 MDT 2014


It was suggested that I possibly purchased the upgraded kit for the stub
axles because the bearings for the upgrade are a different part number
than stock and the stock won't fit. B I don't believe I did, but does
anyone have the new part number for the inner bearing? B  B My apologies
to Ted at TSI, I did not buy the bearing kit from him. It came from
MOSS. B They say that the bearings are the same ones on the upgrade as
are on the stock stub. B I'm getting mixed stories.


Thought about a BFH, but cooler minds prevailed.


Todd


On Mon, Sep 15, 2014 at 01:00 PM, Todd Redmond wrote:

> Friends,
>
>
> Building the front end of the TR3a and I'm having trouble putting the
> inner wheel on the stub axle. B I've checked to make sure they weren't
> going on cockeyed. B I've tried emery cloth and 400 sandpaper for what
> I
> thought was a decent amount of time but still it won"t go on. B I've
> emailed Ted at TSI because I purchased them from him, so I'm pretty
> sure
> they are the right bearings. B Outer ones fit perfectly. B Is there a
> little trick? B Do I continue to use the sandpaper?
>
>
> Thanks for the help.
> Todd
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/alfetta95@optonline.net



More information about the Fot mailing list