[Fot] Fwd: Cams Available

[MadMarx]

FOT:

 

I recommend nitrate hardening of the distributor gear.

I’ve done this 3 years ago and I have NO wear on the gear, which can save you a good cam.

 

Cheers

Chris

 

Von: Fot [mailto:fot-bounces at autox.team.net] Im Auftrag von Joe Alexander
Gesendet: Samstag, 8. August 2015 02:59
An: fot at autox.team.net
Cc: joealexandervintage at gmail.com
Betreff: [Fot] Fwd: Cams Available

 

FOT:

 

This comes from Ken Knight. The effort here is have a continued supply of the Tilden cam designed by Larry Young. Some of us have already purchased one as a back up.

 

There is also an adjustable cam gear that can also be purchased from Ken.

 

Additionally, Ken has done a run of alloy distributor pedestals for the wet sleeve engine.

 

Look for more stuff from 3DR in the future.

Joe Alexander

645 1st Street

Jesup, IA 50648

The-vintage-racer.com

Gasketinnovations.com

Cell:  319.464.4711

 

 





 

From: Kenneth Knight [mailto:kknight at klaenv.com] 
Sent: Friday, August 07, 2015 9:46 AM
To: FOT (fot at autox.team.net)
Subject: Cams Available

 

Calling All Racers!

 

I have made a small run of the Tilden 298Dx racing cam.  (Thank you Larry Young at Tilden for making the master available!)  These cams are ground on new cores.

 

Specs:  Cam Lift .376/Lift at valve .556 gross, .537 net/lobe separation 108 degrees, made to run with stock TR lifters.  The price is $595.00 plus shipping/insurance (about $27.00 to most US addresses).  I have two left ready to ship and more will be produced.  I can pdf a full spec sheet.

 

Adjustable Cam Gear:  Available and can ship with cam.  This gear has been lightened 15% over stock weight for racing and comes with ARP cam bolts ready to safety wire.  $220.00

 

Aluminum Distributor Pedestals:  Still available and they save 2.5 pounds, CNC made in USA.  Requires drive gear for tach to be removed, and I will do this as part of purchase.  I have a stock of drive gears ready to go with pedestal and you send your old drive gear back or I will machine yours.  Price $122.95 w/flat rate shipping, US.

 

Everyone have a safe, fun and fast weekend racing!

 

Cheers

 

Ken Knight

3DR

 

 

 

  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150808/a79d357b/attachment-0001.htm>