[Fot] GT6 Rear Hubs

[Bill Tobin]

I second that. Anythng Richard makes is spectacular. Not cheap but worth every penny.
Bill
  ----- Original Message ----- 
  From: Jim Gray via Fot 
  To: 'Scott Janzen' ; damys at charter.net 
  Cc: fot at autox.team.net 
  Sent: Sunday, January 11, 2015 11:50 AM
  Subject: Re: [Fot] GT6 Rear Hubs


  If the Goodparts hub/cv axle can be adapted I highly recommend them, I have them on my car and they are pure artwork.

  jim

   


------------------------------------------------------------------------------

  From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Scott Janzen via Fot
  Sent: Sunday, January 11, 2015 9:43 AM
  To: damys at charter.net
  Cc: fot at autox.team.net
  Subject: Re: [Fot] GT6 Rear Hubs

   

  I'm curious to see what other answers come up.  Steve Smith used to prep the uprights to accept Datsun stub axles and (I think) TR6 halfshafts - see Kas' first book for photos.

   

  My car came to me with the uprights modified to accept larger (unknown origin) bearings and Corvair stub axles, with the Corvair wheel flange turned down and re-drilled for the Triumph bolt pattern, and Spicer halfshafts.  They've been trouble-free for me;  I'm about to pull them apart for servicing and probably have a duplicate set of uprights made up so they'll be interchangeable with what's on my car.  I believe Lotus Europa owners also swapped out for the corvair stub axles at the time. This was the solution "back in the day".  Any good driveshaft shop can make up the halfshafts.

   

  BTW - these are the stub axles from the articulated independent rear second series Corvair, not the early Nader swing axle cars.

   

  You can see some photos of my car's rear suspension at http://www.britishracecar.com/ScottJanzen-Triumph-GT6.htm

   

  Today, though, you might want to go the Datsun route for better availability, and look at the write-up in Kas' 2010 boo on Chuck Gee's car, which uses a hybrid of Datsun and some cool CV joint axles.

   

   

  On Jan 11, 2015, at 8:00 AM, damys--- via Fot wrote:

   

  Where do we go, who do we talk to about a competition rated rear hub and axle setup for a roto GT6?  We can get the axles built locally, but are having a hard time discovering hub options.  Would prefer purchasing a race proven combination of axle and hub setup.

  Thanks for any help.

  Alex and Dave

  _______________________________________________
  fot at autox.team.net

  http://www.fot-racing.com

  Donate: http://www.team.net/donate.html
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums
  Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com



   



------------------------------------------------------------------------------


  _______________________________________________
  fot at autox.team.net

  http://www.fot-racing.com

  Donate: http://www.team.net/donate.html
  Archive: http://www.team.net/archive
  Forums: http://www.team.net/forums
  Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150111/d0d2e08e/attachment-0001.htm>