[Fot] TR4A/ TR6 inverting lower wishbones ?

[Kas Kastner]

Nice to know someone has been reading my books.

*Never be beaten by equipment.*

On Fri, Jul 17, 2015 at 6:14 PM, J.C. Hassall <jhassall at gmail.com> wrote:

> Yes, I did it and gained 0.5 inches.  You can just swap the A arms on the
> same axle, no need to swap side to side.
>
> jim
>
> Fat-thumbed from my iPhone
>
> On Jul 17, 2015, at 8:33 PM, Jim Gray <toodamnfunky at comcast.net> wrote:
>
>  Greetings
>
> I’m fitting coilovers to the front of the car and I need to find some more
> shock travel, I’m too close to bottom now.
>
> I plan to shim the entire spring pan down to 1” with aluminum bar stock to
> extend the shock.
>
> I have heard you can also invert the wishbones and swap sides ( left to
> right ) and I was wondering if anyone has ever done it.
>
> Just by some rough measurements I should be able to gain an addition 5/8”
> of shock travel with that alone.
>
> Has anyone done it ?
>
>
>
>
>
> jim g
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jhassall@gmail.com
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/kaskastner@gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150717/28025ba9/attachment-0001.htm>