[Fot] Aluminum Flywheel

[Jim Gray]

I've had good luck with the Fidenza. There are some knock off's out there so
get a Fidanza brand or you risk not getting a replacement friction surface.
Guess how I know that ? I'm still pissed about that one.
Jim G

-----Original Message-----
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of J.C. Hassall
Sent: Saturday, November 21, 2015 7:17 PM
To: McKearn McKearn
Cc: FOT list
Subject: Re: [Fot] Aluminum Flywheel

I have a Fidanza on my TR4 - excellent flywheel.  The steel friction surface
is easy to replace if needed.  

For engine mods, read Kas' book about Chuck Gee's car - good info.

jim

Fat-thumbed from my iPhone

> On Nov 21, 2015, at 9:11 PM, McKearn McKearn <mckearn2 at gmail.com> wrote:
> 
> Hi friends.
>   I'm looking for an aluminum flywheel for next years GT6. I have found
the Fidanza's but know notta about them. Can anyone make a recommendation or
a review?
>  Also, going back about thirty years I seam to recall that a good mod for
a TR or GT6 engine was to slightly decrease the radius in the corners of the
rod journals on the crank and use the wider MGB bearings.  Is that still
what's being done?
>                         Thanks. P.J.
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhassall@gmail.com
> 
> 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net